Control-panel walkaround

Control-panel walkaround


The product has the following items on the control panel.

HP CP1510 hb cp01 ug Control panel walkaround

1
Ready light (green): The Ready light is on when the product is ready to print. It blinks when the product is receiving print data.
2
Attention light (amber): The Attention light blinks when a print cartridge is empty or the product requires user attention.
HP CP1510 note Control panel walkaround NOTE:

The Attention light does not blink if more than one print cartridge is empty.

3
Control-panel display: The display provides information about the product. Use the menus on the display to establish product settings. See Use the control-panel menus.
4
Print cartridge status gauges: These gauges show the consumption level for each print cartridge (black, yellow, cyan, and magenta).
If the consumption level is unknown, a ? symbol appears. This can occur in the following circumstances:

The print cartridge is missing or installed incorrectly.

The print cartridge is defective.

The print cartridge might not be an HP cartridge.
5
Left arrow (HP CP1510 arrow left Control panel walkaround) button: Use this button to navigate through the menus or to decrease a value that appears on the display.
6
OK button: Press the OK button for the following actions:

Open the control-panel menus.

Open a submenu displayed on the control-panel display.

Select a menu item.

Clear some errors.

Begin a print job in response to a control-panel prompt (for example, when the message [OK] to print appears on the control-panel display).
7
Right arrow (HP CP1510 arrow right Control panel walkaround) button: Use this button to navigate through the menus or to increase a value that appears on the display.
8
Back arrow (HP CP1510 arrow back Control panel walkaround) button: Use this button for the following actions:

Exit the control-panel menus.

Scroll back to a previous menu in a submenu list.

Scroll back to a previous menu item in a submenu list (without saving changes to the menu item).
9
Cancel Job (X) button: Press this button to cancel a print job whenever the attention light is blinking or to exit the control-panel menus.
HP CP1510 Control-panel walkaround