Manual configuration

Manual configuration


1.
On the control-panel menu, press OK.
2.
Use the Left arrow (HP CP1510 arrow left Manual configuration) or the Right arrow (HP CP1510 arrow right Manual configuration) button to select Network config., and then press OK.
3.
Use the Left arrow (HP CP1510 arrow left Manual configuration) or the Right arrow (HP CP1510 arrow right Manual configuration) button to select TCP IP config, and then press OK.
4.
Use the Left arrow (HP CP1510 arrow left Manual configuration) or the Right arrow (HP CP1510 arrow right Manual configuration) button to select Manual, and then press OK.
5.
Press the Right arrow (HP CP1510 arrow left Manual configuration) button to increase the value for the first section of the IP address. Press the Left arrow (HP CP1510 arrow left Manual configuration) button to decrease the value. When the value is correct, press OK.
6.
If the address is correct, use the Left arrow (HP CP1510 arrow left Manual configuration) or the Right arrow (HP CP1510 arrow right Manual configuration) button to select Yes, and then press OK. Repeat step 5 for the subnet mask and default gateway settings.

-or-

If the IP address is incorrect, use the Left arrow (HP CP1510 arrow left Manual configuration) or the Right arrow (HP CP1510 arrow right Manual configuration) button to select No, and then press OK. Repeat step 5 to establish the correct IP address, and then repeat step 5 for the subnet mask and default gateway settings.

HP CP1510 Manual configuration