|
|
|
| The e-label for one of the print cartridges cannot be read or is missing.
|
| ●
|
| 10.0000 = black e-label error
|
|
| ●
|
| 10.0001 = cyan e-label error
|
|
| ●
|
| 10.0002 = magenta e-label error
|
|
| ●
|
| 10.0003 = yellow e-label error
|
|
| ●
|
| 10.1000 = black e-label is missing
|
|
| ●
|
| 10.1001 = cyan e-label is missing
|
|
| ●
|
| 10.1002 = magenta e-label is missing
|
|
| ●
|
| 10.1003 = yellow e-label is missing
|
|
|
| Reinstall the print cartridge.
|
| Turn the product off and then on.
|
| If the problem is not solved, replace the cartridge.
|
|
|
|
|
| The product experienced an internal error.
|
|
| Turn the product off, wait at least 30 seconds, and then turn the product on and wait for it to initialize.
|
| If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on.
|
|
|
|
|
| The product has experienced an error with the fuser.
|
|
| Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize.
|
| Turn off the product, wait at least 25 minutes, and then turn on the product.
|
| If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on.
|
|
|
|
|
| The product has experienced an internal hardware error.
|
|
| Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize.
|
| If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product on.
|
|
|
|
|
| The product has experienced an error with one of the internal sensors.
|
|
| Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize.
|
| If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on.
|
|
|
|
|
| The product has experienced an internal error.
|
|
| Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize.
|
| If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on.
|
|
|
|
|
| The product has experienced a problem with its internal fan.
|
|
| Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize.
|
| If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on.
|
|
|
|
|
| The product has experienced a problem with one of the motors.
|
|
| Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize.
|
| If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on.
|
|
|
|
|
| The product has experienced an internal firmware error.
|
|
| Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize.
|
| If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on.
|
|
|
|
|
| An incompatible DIMM is installed.
|
|
| 1.
|
| Turn the product power off.
|
|
| 2.
|
|
| 3.
|
|
|
|
|
| <Color> in wrong position
|
|
| A print cartridge is installed in the incorrect slot.
|
|
| Be sure that each print cartridge is in the correct slot. From top to bottom, the print cartridges are installed in this order: yellow, magenta, cyan, black.
|
|
|
|
|
| An internal error occurred.
|
|
| Press OK to resume the job.
|
|
|
|
|
| The product front door is open.
|
|
|
|
|
| Genuine HP supply installed
|
|
| A genuine HP supply was installed. This message will appear briefly after the supply is installed and then be replaced by the message Ready.
|
|
|
|
|
|
| More than one print cartridge is installed in the incorrect slot.
|
|
| Be sure that each print cartridge is in the correct slot. From top to bottom, the print cartridges are installed in this order: yellow, magenta, cyan, black.
|
|
|
|
| Install <Color> cartridge
|
|
| The cartridge is either not installed or not correctly installed in the product.
|
|
|
|
|
|
| You are using an incorrect printer driver.
|
|
| Select the correct printer driver.
|
|
|
|
|
| The product has detected a jam.
|
|
| Clear the jam from the location indicated. The job should continue to print. If it does not, try reprinting the job.
|
|
|
|
|
|
| Load print media into tray 2.
|
|
|
|
| Load tray # <TYPE> <SIZE>
|
|
| A tray is configured for the media type and size that the print job is requesting, but that tray is empty.
|
|
| Load the correct media into the tray, or press OK to use media in a different tray.
|
|
|
|
| Cleaning mode [OK] to start
|
|
| The product is ready to process the cleaning operation.
|
|
| Load tray 1 with plain paper in the size indicated, and then press OK.
|
|
|
|
| Load tray 1 <TYPE> <SIZE>
|
|
| No trays are configured for the media type and size that the print job is requesting.
|
|
| Load the correct media into tray 1, or press OK to use media in a different tray.
|
|
|
|
|
| The first side of a manual duplex job has printed, and the page needs to be loaded to process the second side.
|
|
| Load the page in the indicated tray with the side to be printed face up, and the top of the page away from you and then press OK.
|
|
|
|
| Manual feed <TYPE> <SIZE>
|
| Press [OK] for available media
|
|
| The product is set for manual feed mode.
|
|
| Press OK to clear the message or load the correct media into tray 1.
|
|
|
|
|
| The product memory is almost full.
|
|
| Press OK to finish the job, or press X to cancel the job.
|
| Break the job into smaller jobs that contain fewer pages.
|
|
|
|
|
| Print media has been delayed as it moves through the product.
|
|
| Press OK to clear the message.
|
|
|
|
|
| A non-HP supply is installed.
|
|
| Service or repairs that are required as a result of using non-HP supplies are not covered under HP warranty.
|
|
|
|
|
| The identified print cartridge is nearing the end of its useful life.
|
|
| Order the identified print cartridge. Printing will continue until Replace <color> cartridge appears.
|
|
|
|
|
| More than one supply item is low.
|
|
| Check the supply-level gauges on the control panel, or print a Supplies status page to determine which cartridges are low. See Print information pages.
|
| Order the identified print cartridges. Printing will continue until Replace <color> cartridge appears.
|
|
|
|
| Press [OK] If error repeats turn off then on
|
|
| The product cannot process the page.
|
|
| Press OK to continue printing the job, but output might be affected.
|
| If the error persists, turn the power off and then on. Resend the print job.
|
|
|
|
|
| The product rear door is open.
|
|
|
|
|
| Remove shipping locks from <color> cartridge
|
|
| A print cartridge shipping lock is installed.
|
|
| Be sure that the print cartridge shipping lock has been removed.
|
|
|
|
| Remove shipping locks from all cartridges
|
|
| A print cartridge shipping lock is installed on one or more print cartridges.
|
|
| Be sure that each print cartridge shipping lock has been removed.
|
|
|
|
| Replace <color> cartridge
|
|
| The print cartridge is empty.
|
|
|
|
|
|
| The Print quality menu item Replace supplies is set to Override out.
|
|
| You can continue printing until you notice a decrease in print quality.
|
|
|
|
| Clear jam and then Press [OK]
|
|
| The product has detected a jam.
|
|
| Clear the jam from the location indicated, and then press OK.
|
|
|
|
| Unexpected size in tray #
|
|
| The product has detected print media in the tray that does not match the configuration for the tray.
|
|
|
|
|
| Used <color> Cartridge in use
|
|
| A refilled print cartridge was detected and accepted.
|
|
|
|
|
|
| Refilled print cartridges are installed.
|
|
|
|
|
|
| A refilled print cartridge is installed.
|
|
|
appears in the Status alert column in the following table.